产品中心
Product Center
Product details
Product Specifications
| Classification | Specification | |
| Input voltage | DC 24V±10% | |
| Input Current | MAX.300MA | |
| Power consumption | MAX.7W | |
| Discharge voltage | ±4.75kV~±5.5kV(4 levels adjustable) | |
| Output frequency | 0.1Hz~60Hz（Adjustable） | |
| Ion generation method | Corona discharge | |
| Voltage input method | PulseAC | |
| Material | Body: discharge needle / discharge needle: tungsten | |
| Discharge needle replacement | Replaceable | |
| Ion balance | Below average±30V | |
| Static removal distance | 200mm~2000mm | |
| supply gas | Type | Clean dry air N2 |
| Pressure | 0~0.5Mpa（Usually lower than0.3Mpa） | |
| Flow | 2L/min（±10%）[lower than0.1Mpa] | |
| Gas supply pipe diameter | 6pi（External） | |
| Ozone generation | Lower than0.005ppm | |
| Operating temperature | 0℃~＋50℃（32~122℉） | |
| Humidity | 35~85%RH（Non-condensing） | |
※Due to continuous performance improvement of the product, technical specifications are subject to change without prior notice.
Product advantages
40% reduction in cross-sectional area compared to MB-Series
Compared with MB-Series, it has significantly reduced volume and weight, making it easier to install in narrow spaces.
Free installation 180% rotation
The special bracket is used, which makes the installation more convenient. The original angle can be adjusted up and down by 120% and can be adjusted to 180% after being improved. Compared with it, the installation is more free
low maintenance
Optimal nozzle design reduces air consumption and minimizes foreign matter generation.
The aerodynamic design is adopted to reduce the gas consumption and minimize the adhesion of foreign matter at the discharge needle.
Single nozzle air consumption
0.3Mpa.....approx 5.1β/min
0.1Mpa.....approx 2.0β/min
For details, please click the attachment above to download and preview
Related products
Contact us
Address: Building 37, Longhu Science and Technology Innovation Park, Longzihu District, Bengbu City, Anhui Province
WeChat sweep