产品中心

产品中心

Product Center


+
  • G型这的.jpg

"G" type fold


Category


Product accessories


Product details


1. Product Introduction
(1) Main content of the product:

UTG (Ultra Thin Glass) makes innovations in the field of consumer electronics a reality. It is currently mainly used in foldable mobile notebooks, tablet computers, mobile phones and smart wearable products. In the future, it can be applied to photovoltaic solar thin film batteries.
(2)Features

Compared with CPI (Clear PI), the UTG material, which is known to have good bending toughness, high transmittance and high hardness, is used through laser cutting, lamination mechanical cutting, and a variety of chemical treatments. After the unique ion-exchange glass chemical strengthening technology, the hardness and flexibility of the glass have been greatly improved again, and the number of bending times can reach UTG of more than 600,000 times.

When appropriate, AF+AR UTG is formed on the UTG touch surface by physical vapor deposition (PVD), so that a high transmittance AF with harder surface hardness, fingerprint oil resistance and stronger anti-interference ability can be obtained +AR UTG.

If necessary, the UTG with different surface resistance values can be obtained by using the existing physical vapor deposition metal non-conductive (NCVM) method to realize the function of anti-jamming signal.

 

2. Product details
(1)Technical route

The glass below 0.1mm in thickness is thinned to below 0.1mm or the thickness required by customers through special chemical methods on the basis of glass sheets with thickness of 0.20-0.33mm, and 0.1mm, 0.07mm, 0.05mm, 0.03mm can also be used directly The original glass substrate of equal thickness is formed by one-time cutting, edging, chamfering, chemical strengthening, etc. by laser cutting, lamination, and circular knife cutting methods to obtain UTG that can be bent at least 400,000 times.

If it is necessary to improve the transmittance and tactility of UTG, additional processing methods: deposit AR layer by PVD method on the touch surface - deposit AF layer;

If it is necessary to protect the damage resistance of UTG, additional processing method: Use OCA (transparent optical adhesive) on the touch surface of UTG to paste AF+AR PET or CPI ultra-thin optical film coated with scratch-resistant coating.

(2) Product technical data

2.1 UTG types:

Most of them will use Corning or Schott's glass substrate, which can be suitable for folding displays after thinning.

Ultra Thin Glass

Factory

Product name

Thickness before thinning

Thickness after thinning

Kangning

GG3

0.4mm

0.5mm

 

30μm

50μm

70μm

Xiaote

AS87

50μm

100μm

210μm

30μm

50μm

70μm

 

2.2 Main technical data:

Number

Name

100μm UTG

70μm UTG

1

Number of bends

400,000 times

500,000 times

2

Bending radius

R=2.0mm

R=1.5mm

3

Size

15.6 inches (diagonal)

15.6 inches (diagonal)

4

Transmittance

94.5% (Single-sided AR)
98.5% (double-sided AR)

94.5% (Single-sided AR)
98.5% (double-sided AR)

5

Picture

 

 

 

 

2.3 Laminated diamond cutting method Technical features:

Improve yield and improve production efficiency process - accumulation layer process

●The accumulation layer process is the best method for thin film glass CUTTING and processing to maintain a high yield
●Possess bevel cutting technology in the state of accumulated layer glass

2.4 Comparison of cutting methods with competing products:

Compared with other competing companies that need to perform the next process of edge grinding and chamfering after cutting, the multi-layer lamination one-time cutting and chamfering greatly improves work efficiency and improves the yield.

2.5 Processing the data of edge section:

· The shape of the edge of the processing surface can be freely selected

 

2.6 Glass section of core glass processing method:

· Beveled surface attached to the processed surface-relieve impact and pressure dispersion effect
· Flawless finish (no cracks, no damage)
· Protection of process steering wheel and GLASS surface - making higher yield

[Side image of each glass thickness - Chamfer form]

 

2.7 Glass product test data:

Redius (folding rate) Test

Thickness
(um)

Radius  Value(mm)

Remark

Average

Min

Max

Other competing companies

30

0.4

0.2

0.7

0.7-1.0

AS87 Glass

50

0.7

0.5

0.9

1.2-1.5

70

1.5

0.9

1.8

2.2-2.5

100

2.0

1.8

2.3

 

 

Static Bending Test

Thickness(um)

Radius(mm)

TIME(days)

Remark

30

0.4R

14

14-day placement test in folded state at room temperature
AS87 GLASS
Unbreakable for 14 days

50

0.7R

14

70

1.5R

14

100

2.0R

14

 

Drop ball test

Thickness
(um)

DOL
(um)

BallDrop(cm)

Remark

Min

Max

30

7 ~ 8

20

30

 

AS87 Glass
130gball

50

9 ~ 10

30

40

70

9 ~ 10

35

50

100

10 ~ 12

40

60

 

Pen drop test

Test method: glass + front and back (no OCA, FILM)

Thickness
(um)

DOL
(um)

Ball Drop(cm)

Remark

Min

Max

30

7 ~ 8

10

15

 

AS87 GLASS

50

9 ~ 10

15

25

70

9 ~ 10

22

30

100

10~ 12

25

35

 

3. Comprehensive comparison with similar products at home and abroad:

Number

UTG Thickness(μm)

Test items

B

D

T

Our company

1

30

Bending radius

0.5R

0.5R

0.5R

0.5R

2

Number of bends

440,000

460,000

430,000

600,000

3

Transmittance

89.2%

89.6%

89.7%

90.5%

1

50

Bending radius

1.0R

1.0R

1.0R

1.0R

2

Number of bends

390,000

420,000

400,000

550,000

3

Transmittance

89.3%

89.1%

89.9%

90.5%

1

70

Bending radius

1.5R

1.5R

1.5R

1.5R

2

Number of bends

360,000

340,000

350,000

500,000

3

Transmittance

89.6%

89.3%

89.7%

90.3%

1

100

Bending radius

2.0R

2.0R

2.0R

2.0R

2

Number of bends

280,000

260,000

290,000

400,000

3

Transmittance

89.9%

89.1%

89.7%

90.3%

 

4. Relevant test pictures

Previous

Next

上一页

下一页

Related products